|LEGO → System → Creator|
The polybag contains 59 pieces, which are used to build a small train. A 2 x 3 Earth Blue plate is placed on top of a 2 x 2 Medium Stone Gray plate with bearing elements, and a second one of the same piece is attached to the overhanging bit of the Earth Blue plate. A 2 x 6 Black plate is placed on top of the Earth Blue one, extending to the right. Underneath the Black plate, a 2 x 2 Medium Stone Gray plate with Technic hole is attached to the far right end, with two Medium Stone Gray connector pegs placed inside. Flipped over again, a Black 1 x 2 / 1 x 4 angle plate is attached to the overhanging bit of the second plate with bearing element, and an outward-facing Dark Stone Gray 1 x 2 angular plate is placed on top of that. Attached to the two front-facing angular plate is a vertically-placed 2 x 2 Black sport canopy, which serves as the train's cowcatcher. Two Medium Stone Gray stud tiles are placed to the side of that, serving as headlights. Half of the top of the car is covered in four 1 x 2 Medium Stone Gray plates with shafts pointing outwards, and the other half is covered by a 2 x 2 plate and a 2 x 2 plate with ball joint pointing outwards and to the back. The top is again covered with Bright Red 2 x 3 plates, 1 x 4 plates, and a radiator grille. The front two thirds of the top are again covered by a White 2 x 2 angular plate facing front, 2 x 2 plate, and two 2 x 2 corner plates. Behind the corner plates is a 1 x 4 plate, and behind that is two 1 x 1 plates with holders at each end. A 2 x 2 Earth Blue plate is placed on top of the angular plate and normal plate, and behind that is a 2 x 3 plate and 1 x 3 plates at each end. Two 2 x 2 bricks with bows are placed on the top of the train, a 1 x 2 brick is placed behind then, and two 1 x 2 Transparent bricks are again placed at each end. Two Earth Blue 1 x 1 cylinders are placed behind those, and the whole structure is then topped by two 2 x 4 Earth Blue plates with bows, forming the roof of the train. A 2 x 2 Bright Red circle plate with an Earth Blue circle with snap on top and Transparent stud on top of that is placed on the angular plate, forming the front of the train. Six wheels are attached, three on each side. A small stud build is placed on the top of the train, forming the funnel and finishing the build.